Navegação
- Introdução
- O Que é Uma Mangueira e Para Que Serve
- Constituição de uma Mangueira
- Características das Mangueiras
- Raio de Dobragem
- Classificação de Mangueiras
- O Projecto de Mangueiras
- Factores de Segurança
- O Fabrico de Mangueiras
- Normas para Mangueiras
- Ensaio de Mangueiras
- Selecção de Mangueiras
- Comprimento das mangueiras
- Determinação da capacidade de armazenagem de mangueiras enroladas em bobines
- Mandris para o Fabrico de Mangueiras
- Voltar a Aplicações
- Voltar a Borracha
- Autor
- Materiais de Engenharia
- Borracha
- Proj. de Artefactos
- Processos
- Referências
- Referências
- Livros Técnicos
- Artigos Técnicos
- Portugueses na Indústria da Borracha
- Abreviaturas Utilizadas na Indústria da Borracha
- Websites com Interesse
- Trabalhos do Autor
- A Minha Vida na I. B.
- Novas Publicações
- Trabalhos de Outros Autores
- Ensaios, Formação, Consultoria e Estudos de Caso
- Sugestões para Outras Áreas Industriais
- CTBorracha SP
Normas para Mangueiras
Normas ISO sobre Mangueiras e Acessórios
(Normas dedicadas a ensaios possuem o número em bold)
ISO 1307:2006 – Rubber and plastics hoses — Hose sizes, minimum and maximum inside diameters, and tolerances on cut-to-length hoses.
ISO 1402:2009 – Rubber and plastics hoses and hose assemblies — Hydrostatic testing.
ISO 1403:2005 – Rubber hoses, textile-reinforced, for general-purpose water applications – Specification.
ISO/CD 2398 – Rubber hoses, textile-reinforced, for compressed air – Specification.
ISO 2398:2006 – Rubber hoses, textile-reinforced, for compressed air – Specification.
ISO 3994:2014 – Plastics hoses — Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials – Specification.
ISO 4023:2009 – Rubber hoses and hose assemblies for steam — Test methods.
ISO 4080:2009 – Rubber and plastics hoses and hose assemblies — Determination of permeability to gas.
ISO 4641:2010 – Rubber hoses and hose assemblies for water suction and discharge – Specification.
ISO 4671:2007 – Rubber and plastics hoses and hose assemblies — Methods of measurement of the dimensions of hoses and the lengths of hose assemblies.
ISO 4671:2007/Amd 1:2011 – Clarification of position at which outside diameter is measured.
ISO/DIS 5774 – Plastics hoses — Textile-reinforced types for compressed-air applications – Specification.
ISO 5774:2006 – Plastics hoses — Textile-reinforced types for compressed-air applications – Specification.
ISO/CD 6134 – Rubber hoses and hose assemblies for saturated steam – Specification.
ISO 6134:2005 – Rubber hoses and hose assemblies for saturated steam – Specification.
ISO 6224:2011 – Thermoplastics hoses, textile-reinforced, for general-purpose water applications – Specification.
ISO 6801:1983 – Rubber or plastics hoses — Determination of volumetric expansion
ISO 6801:1983/Amd 1:2011 – Deletion of alcohol as pressurizing fluid.
ISO 6802:2005 – Rubber and plastics hoses and hose assemblies with wire reinforcements — Hydraulic impulse test with flexing.
ISO/CD 6802 – Rubber and plastics hoses and hose assemblies with wire reinforcements — Hydraulic impulse test with flexing.
ISO 6803:2008 – Rubber or plastics hoses and hose assemblies — Hydraulic-pressure impulse test without flexing.
ISO/CD 6803 – Rubber or plastics hoses and hose assemblies — Hydraulic-pressure impulse test without flexing.
ISO/CD 7233 – Rubber and plastics hoses and hose assemblies — Determination of resistance to vacuum.
ISO 7233:2006 – Rubber and plastics hoses and hose assemblies — Determination of resistance to vacuum.
ISO 7326:2006 – Rubber and plastics hoses — Assessment of ozone resistance under static conditions.
ISO/CD 7326 – Rubber and plastics hoses — Assessment of ozone resistance under static conditions
ISO 7369:2004 – Pipework — Metal hoses and hose assemblies – Vocabulary.
ISO 7662:1988 – Rubber and plastics hoses — Determination of abrasion of lining.
ISO/CD 7751 – Rubber and plastics hoses and hose assemblies — Ratios of proof and burst pressure to maximum working pressure.
ISO 7751:1991 – Rubber and plastics hoses and hose assemblies — Ratios of proof and burst pressure to maximum working pressure.
ISO 7751:1991/Amd 1:2011 – Replacement of “design working pressure” by “maximum working pressure” throughout text.
ISO 8029:2014 – Plastics hose — General-purpose collapsible water hose, textile-reinforced – Specification.
ISO 8030:2014 – Rubber and plastics hoses — Method of test for flammability.
ISO 8031:2009 – Rubber and plastics hoses and hose assemblies — Determination of electrical resistance and conductivity.
ISO 8032:1997 – Rubber and plastics hose assemblies — Flexing combined with hydraulic impulse test (half-omega test).
ISO 8033:2006 – Rubber and plastics hoses — Determination of adhesion between components.
ISO/CD 8033 – Rubber and plastics hoses — Determination of adhesion between components.
ISO 8308:2006 – Rubber and plastics hoses and tubing — Determination of transmission of liquids through hose and tubing walls.
ISO/DIS 8308 – Rubber and plastics hoses and tubing — Determination of transmission of liquids through hose and tubing walls.
ISO 8330:2014 – Rubber and plastics hoses and hose assemblies – Vocabulary.
ISO 8331:2014 – Rubber and plastics hoses and hose assemblies — Guidelines for selection, storage, use and maintenance.
ISO/CD 8331 – Rubber and plastics hoses and hose assemblies — Guidelines for selection, storage, use and maintenance.
ISO 10380:2012 – Pipework — Corrugated metal hoses and hose assemblies.
ISO 10619-1:2011 – Rubber and plastics hoses and tubing — Measurement of flexibility and stiffness — Part 1: Bending tests at ambient temperature.
ISO 10619-2:2011 – Rubber and plastics hoses and tubing — Measurement of flexibility and stiffness — Part 2: Bending tests at sub-ambient temperatures.
ISO 10619-3:2011 – Rubber and plastics hoses and tubing — Measurement of flexibility and stiffness — Part 3: Bending tests at high and low temperatures.
ISO 10806:2003 — Pipework — Fittings for corrugated metal hoses.
ISO 10960:1994 – Rubber and plastics hoses — Assessment of ozone resistance under dynamic conditions.
ISO 12151-1:2010 – Connections for hydraulic fluid power and general use — Hose fittings — Part 1: Hose fittings with ISO 8434-3 O-ring face seal ends.
ISO 12151-2:2003 – Connections for hydraulic fluid power and general use — Hose fittings — Part 2: Hose fittings with ISO 8434-1 and ISO 8434-4 24 degree cone connector ends with O-rings.
ISO 12151-3:2010 – Connections for hydraulic fluid power and general use — Hose fittings — Part 3: Hose fittings with ISO 6162-1 or ISO 6162-2 flange ends.
ISO 12151-4:2007 – Connections for hydraulic fluid power and general use — Hose fittings — Part 4: Hose fittings with ISO 6149 metric stud ends.
ISO 12151-5:2007 – Connections for hydraulic fluid power and general use — Hose fittings — Part 5: Hose fittings with ISO 8434-2 37 degree flared ends.
ISO 12151-6:2009 – Connections for hydraulic fluid power and general use — Hose fittings — Part 6: Hose fittings with ISO 8434-6 60 degree cone ends.
ISO 15348:2002 – Pipework — Metal bellows expansion joints – General.
ISO 15465:2004 – Pipework — Stripwound metal hoses and hose assemblies.
ISO 17165-1:2007 – Hydraulic fluid power — Hose assemblies — Part 1: Dimensions and requirements.
ISO/TS 17165-2:2013 – Hydraulic fluid power — Hose assemblies — Part 2: Practices for hydraulic hose assemblies.
ISO/TR 17784:2003 – Rubber and plastics hoses and hose assemblies — Guide for use by purchasers, assemblers, installers and operating personnel.
ISO 18752:2014 – Rubber hoses and hose assemblies — Wire- or textile-reinforced single-pressure types for hydraulic applications – Specification.
ISO/CD 19718 – Rubber and plastics hoses and hose assemblies, wire- or textile- reinforced, for hydraulic power units used in hydraulic tool applications – Specification
ISO 28702:2008 – Rubber and plastics hoses and tubing — Textile-reinforced types — Sub-ambient temperature crush test.
ISO 30013:2011 – Rubber and plastics hoses — Methods of exposure to laboratory light sources — Determination of changes in colour, appearance and other physical properties.
